Description
MST-BAR 10 mm x 10 ft. Fibreglass Rebar is a proven economical solution to reinforcing concrete structure. With a life span of more than 100 years, MST-BAR® is more durable & much longer lasting solution over galvanized, epoxy coated and stainless steel. Approved & Manufactured in compliance with CSA S807 & ACI 440.
Features
- 100 % Non-Corrosive
- Non-Magnetic
- Stronger than steel
- Light weight -1/4 the weight of Steel
- Electrical insulator
- Thermal insulator
- Can be cut using steel saw, a band saw and or grinder with a diamond blade
- Same installation as steel rebar but does not require bends
- Much higher fatigue resistance than steel
- Made in Canada
Specifications
Tensile Strength | 1000 Mpa (145 ksi) |
Bond Strength to Concrete | 20 Mpa Minimum (2900 Psi Minimum) |
Tensile Modulus | 65 Gpa (9427 ksi) |
Tensile Load | 74 kN (16636 lbf) |
Ultimate Strain (efu) | 1.5 % |
Resistance to Alkali Environment | +90% of ultimate tensile capacity after 2160 hours of direct exposure to an alkali solution with a pH level of 13 at 60 degrees Celsius |
Minimum Operating Temperature | -40 degrees Celsius with Zero effect |
Applications | Bridges, EMI & RFI Applications, Water Treatment, Dams, Parking garages, Tunnel Applications, Roads, Medical Technology Centers and more |
Meets Many Standards | CSA-S6-06, CSA-S806-02, ISIS Design Manual No. 3, ISIS Design Manual No. 5, ACI 440.1R-06, ACI 440R-07, ACI 440.5-08, ACI 440.6-08, AASHTO GFRP-1 |
Storage | Long-term outdoor storage requires tarping to prevent UV damage |
SABERCUT SDS Max Flat Chisel 3" X 36”
Item No.
35976
$84.99
SABERCUT SDS Max 6" Floor Scraper
Item No.
35970
$179.99