DEWALT POWERS 7410SD1 3/8 in. x 2-1/4 in. POWER-STUD+ SD1 Wedge Expansion Anchor (50-Pack) is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
- UNC threaded stud
- Zinc plated carbon steel body with expansion clip, nut and washer
- Anchor size range: 1/4" diameter through 1-1/4" diameter
- General applications: Structural connections, i.e., beam and column anchorage; safety-related attachments; interior applications / low level corrosion environment; tension zone applications such as cable trays and strut, pipe supports, fire sprinklers; seismic and wind loading
Specifications
| Model No. |
7410SD1 |
| Anchor Size |
3/8" x 2-1/4" |
| Thread Length |
7/8" |
| Quantiy per Box |
50 |
| Anchor Body |
Medium carbon steel |
| Hex nut |
Carbon Steel, ASTM A 563, Grade A |
| Washer |
Carbon Steel, ASTM F 844; meets dimensional requirements of ANSI B18.22.2. Type A Plain |
| Expansion wedge (clip) |
Carbon Steel |
| Plating |
Zinc plating according to ASTM B 633, SC1 Type III (Fe/Zn 5). Minimum plating requirements for Mild Service Condition. |
