HONDA 110 Gallon 2 in. High Pressure Water Pump is a 50 mm (2 in), high-output, high-pressure pump that can perform a wide range of duties from general water transfer to irrigation. It can even be used with a fire hose nozzle for emergency backup in remote areas. It's powered by a Honda GX160, OHV engine for dependable starts and long life.
Maximum pumping capacity is 500 litres per minute. A convenient carrying handle and hose strainer come standard.
Features
- High output 500 litres per minute (110 Imp. gal. per minute), high pressure (61 psi).
- Honda GX160 OHV engine.
- 50 mm (2 in) suction and discharge ports.
- Uses: General water transfer, high pressure to irrigation.
Specifications
| Water Pump Type |
High pressure |
| Pump |
Centrifugal |
| Type |
Self-Priming |
| Suction Port Diameter |
50.0 mm (2.0 in) |
| Discharge Port Diameter |
50.0 mm (2.0 in) |
| Litres per Minute |
500 |
| Imp. Gal. per Minute |
110 |
| Litres per Hour |
30000 |
| Imp. Gal. per Hour |
6600 |
| Total Head |
43 m (141 ft) |
| Suction Head (Total Lift) |
8 m (26 ft) |
| Priming Time @ 5m(16.4 ft.) |
80 seconds |
| Pump Body |
Aluminum |
| Impeller |
Cast iron |
| Honda Engine |
GX160T2 |
| Type |
4-stroke, OHV, single cylinder |
| Displacement |
163 cc (9.95 CID) |
| Lubrication System |
Forced splash |
| Governor |
Mechanical centrifugal |
| Starting System |
Recoil starter |
| Fuel Tank Capacity |
3.10 L (0.68 Imp. gal) |
| Oil Alert |
N/A |
| Drive Unit Type |
Direct coupled / mechanical seal |
| Frame Type |
Handle type, steel base |
Dimensions and Weights
| Item Length: |
42.5 cm (16.7 in) |
Item Width: |
37.5 cm (14.8 in) |
| Item Height: |
40.5 cm (15.9 in) |
Item Weight: |
23.5 kg (51.8 lb) |
