Description
The G3 gas-actuated fastening tool is a portable fastener tool for attaching light-duty fixtures to concrete, steel, concrete block (CMU), lightweight concrete over metal deck and cold-formed steel. As a magazine tool, G3 is ideal for attaching drywall track, furring strips, hat track and angle track using GDP and GDPS collated pins. G3 offers you the flexibility of having two tools in one convenient package - a magazine tool that easily converts to a single-shot tool. As a single-shot tool, the G3 is great for attaching mechanical, electrical and plumbing fixtures with preassembled pins/accessories such as washer pins, ceiling clips, tophats and threaded studs. The preassembled pins for the single-shot tool use 0.283 in headed fasteners with 0.126 in diameter shanks for stronger fastening performance. Both the single-shot and magazine tool offer portability without the need for cords or hoses and are actuated with GFC34 gas fuel cells.
Feature Bullets
- Depth of Drive control switch for pin depth adjustment
- Battery charge indicator lights
- Comfortable "sure-grip" rubber handle and ladder hook
- Easy start-up procedure: Insert fuel cell, insert battery, load pins and begin use
- Easy to clear a fastener jam
- 45-Pin capacity magazine
- 8000 Shots per Li-ion battery charge
- Minimum cleaning required
- Only requires cleaning every 20000 shots
- Easy access to the air filter and piston chamber
- The magazine is designed to retain two pins during use to prevent the tool from discharging without a fastener (which can damage the tool and possibly cause injury). The tool will resume normal operation when additional pins are loaded
Specifications:
Nail Length: 1/2 - 1-1/2 in
Nail Diameter: 0.24-0.3 in
Voltage Rating: 7.2 VDC
Battery Type: Lithium-Ion
Battery Capacity: 3 Ah
Overall Length: 14 in
Overall Width: 4.75 in
Application: For Drywall Track, Lath Wire for Stucco, Water-Proofing Membrane, Furring Strips, Cables and Conduits
